Mullins can help plumb your project with OEM style rubber hoses or braided stainless steel hose kits. We stock many popular applications. The braided stainless steel hose kits use a high-pressure, Teflon lined hose on the high-pressure side.

2-Piece Stainless/AN
Consists of a teflon stainless hose and steel 90 degree fittings for the high-pressure side. The return/low pressure side uses a rubber/stainless hose with a 90 degree aluminum fitting and hose clamp for the pump inlet. Adapters are provided to convert inverted flare or o-ring. Early Mustang and GM applications are also provided with brass inserts for inverted flares.

3-Piece Stainless/AN
Same as 2 piece hose kit with addition of a #10 stainless/ rubber hose from the pump and remote reservoir. #10 aluminum AN fittings are provided along with adapters for the pump and reservoir. The length of the return hose and fittings may vary by application. Remote reservoir must be mounted above pump for gravity feed return.

2-Piece Rubber
Consists of neoprene/fiber power steering hose. Hose ends are 90 degree steel inverted flare style. Hose kits for early Mustang racks and early GM 605 boxes are supplied with brass inserts to convert rack to inverted flare. Later Mustang racks and GM boxes are supplied with O-ring to Inverted flare adapters. Return hose is supplied with a hose clamp at the pump end.